Maps And Navigation · VERIFIED REFERENCE

Iron Nest Ballistics and Targeting: Field Guide

Treat every firing solution as a fresh map problem: identify the present Iron Nest position, establish the target, then record the bearing, range, charges, and elevation used for that shot.

The supplied walkthrough says Iron Nest is solved by reading, locating, calculating, preparing, firing, and confirming. Ballistics therefore begin before the turret controls: first determine what the order is asking for and where the target actually is. A reported bearing, distance, correction, railway waypoint, vessel course, or position report can be a clue rather than a ready-to-enter gun value. Do not turn a clue directly into a firing value without establishing what it is measured from.

The source describes a clean separation between finding the target and firing at it. Put the current Iron Nest position and the target on the map, then draw the final line between them. The direction and distance of that line are the relevant firing inputs described by the supplied guide. If either point is uncertain, the solution is incomplete and should be treated as 待确认 rather than made more precise by guesswork.

The current position of the Iron Nest is part of the solution. The provided material specifically warns against reusing a firing card after the Nest moves, because the same target will require a new final line from the new origin. A previously measured target may remain valid, but the bearing and range record can become obsolete. Rebuild the record whenever the firing origin changes.

This rule also makes troubleshooting more manageable. If a shot does not match the expected result, check whether the target was located from the correct current position before changing elevation or charge settings. Altering several inputs at once removes the evidence needed to learn what went wrong. Work from the map outward, then bring the physical controls into agreement with the final record.

The supplied ballistic-calculator material confirms that players ask about the calculator interface, but it does not provide a complete, official explanation of every field. This guide therefore does not assign a hidden purpose to the calculator's top section or publish a formula that the available sources cannot support. The safe use is to compare the calculator output with the target line and the settings you intend to use. Any field whose function is not documented in the game or an official source remains 待确认.

The official game description confirms map measurement from received coordinates and gunlaying the cannons. It does not, in the supplied material, publish a universal table of ranges, elevations, or charges. That is why this reference focuses on input discipline rather than fabricated numbers. Use the live interface for exact values and preserve the result with the rest of the firing record.

The provided missions guide advises players to record bearing, range, charges, and elevation, then verify that the correct left or right gun is armed. These values belong to one shot and one gun state. A correct range paired with a different charge count or gun is no longer the same solution. Before firing, read the entered settings back against the record.

Developer discussion included in the supplied research says the game does not simulate shell spread and that shells land where calculated. This can make a disciplined record especially useful: a discrepancy should prompt a check of target location, firing origin, and entered settings. It is not a license to assume all future systems are unchanged. Confirm current behavior after updates and mark any conflicting observation as 待确认.

Use the impact report as the boundary between attempts. The supplied walkthrough warns against firing again before reading the previous report, because that makes corrections harder to attribute. If you need to adjust, change the smallest number of inputs supported by the new information. Then write a new record instead of overwriting the old one.

This page is a source-labelled operating method, not a calculator replacement. It combines the supplied mission walkthrough with the available calculator research and states its evidence limits plainly. For map-specific help, consult the map and triangulation entries in the related field notes. For exact mechanics that are not documented here, the correct status is 待确认.